Advancements in Welding Technology: A Comprehensive Review of Techniques, Materials, and Applications
DOI:
https://doi.org/10.1234/jm6e4w53Kata Kunci:
welding technology, techniques, materials, applications, advancements.Abstrak
Welding is a critical process in engineering structure fabrication, and advancements in technology have enhanced its efficiency, quality, and safety. This paper presents a comprehensive review of the latest welding techniques, materials, and applications. It covers various processes like arc welding, laser welding, friction welding, and ultrasonic welding. Materials such as metals, plastics, and composites used in welding are discussed, alongside applications in aerospace, automotive, and construction industries. The future direction of welding technology and its impact on industry and society is also explored. The review begins with an overview of the evolution of welding techniques, including traditional methods like shielded metal arc welding and gas metal arc welding, as well as advanced techniques like laser welding and friction stir welding. Each technique's advantages, limitations, and application areas are examined, highlighting their effectiveness across industries. Furthermore, the paper discusses advancements in welding materials, such as high-strength alloys, composites, and specialized coatings. Their impact on weldability, mechanical properties, and corrosion resistance is evaluated, along with their applications in specific industries. The study also investigates a wide range of welding applications in automotive manufacturing, shipbuilding, oil and gas pipelines, and aerospace engineering. Specific requirements and challenges for each application are addressed, along with commonly used welding techniques and materials. In conclusion, this comprehensive review showcases significant advancements in welding technology and their implications for various industries. It underscores the importance of staying updated with the latest techniques and materials to optimize welding processes, improve product quality, and ensure the safety and reliability of welded structures. This paper serves as a valuable resource for researchers, engineers, and industry professionals seeking to enhance their understanding of welding technology and explore its vast potential in different applications.
Unduhan
Referensi
[4] N. Jeyaprakash, A. Haile, and M. Arunprasath, “The parameters and equipments used in TIG welding: A review,” Int. J. Eng. Sci., vol. 4, no. 2, pp. 11–20, 2015.
[5] P. Kah and J. Martikainen, “Current trends in welding processes and materials: improve in effectiveness,” Rev. adv. mater. Sci, vol. 30, no. 2, pp. 189–200, 2012.
[6] B. L. Tanko and N. A. Anigbogu, “The use of personal protective equipment (PPE) on construction sites in Nigeria,” in Proceedings of the 4th West Africa Built Environment Research (WABER) Conference, 2012, pp. 1341–1348.
[7] M. Tisza and I. Czinege, “Comparative study of the application of steels and aluminium in lightweight production of automotive parts,” Int. J. Light. Mater. Manuf., vol. 1, no. 4, pp. 229–238, 2018.
[8] D. Papaioannou, A. Sutton, and A. Booth, “Systematic approaches to a successful literature review,” Syst. approaches to a Success. Lit. Rev., pp. 1–336, 2016.
[9] P. Kah, R. Suoranta, and J. Martikainen, “Advanced gas metal arc welding processes,” Int. J. Adv. Manuf. Technol., vol. 67, pp. 655–674, 2013.
[10] T. S. Hong, M. Ghobakhloo, and W. Khaksar, “Robotic welding technology,” Compr. Mater. Process., vol. 6, no. February, pp. 77–99, 2014.
[11] S. Katayama, “Laser welding,” J. Japan Weld. Soc., vol. 78, no. 2, pp. 124–138, 2009.
[12] D. Kumar Rajak, D. D. Pagar, P. L. Menezes, and A. Eyvazian, “Friction-based welding processes: friction welding and friction stir welding,” J. Adhes. Sci. Technol., vol. 34, no. 24, pp. 2613–2637, 2020.
[13] M. B. Uday, M. N. Ahmad Fauzi, H. Zuhailawati, and A. B. Ismail, “Advances in friction welding process: a review,” Sci. Technol. Weld. Join., vol. 15, no. 7, pp. 534–558, 2010.
[14] B. Acherjee, “Laser transmission welding of polymers–a review on welding parameters, quality attributes, process monitoring, and applications,” J. Manuf. Process., vol. 64, pp. 421–443, 2021.
[15] M. Golob, “Integrated models of a Gas Metal Arc Welding process and inverter based power supply for process control simulation studies,” Elektron. ir Elektrotechnika, vol. 20, no. 7, pp. 3–6, 2014.
[16] M. Golob and B. Tovornik, “Modelling, simulation and control of gas metal arc welding,” in 7th EUROSIM Congress on Modelling and Simulation, Prague, Czech Republic, 2010, p. 6.
[17] A. Gisario, M. Kazarian, F. Martina, and M. Mehrpouya, “Metal additive manufacturing in the commercial aviation industry: A review,” J. Manuf. Syst., vol. 53, pp. 124–149, 2019.
[18] P. Kah, M. Shrestha, E. Hiltunen, and J. Martikainen, “Robotic arc welding sensors and programming in industrial applications,” Int. J. Mech. Mater. Eng., vol. 10, no. 1, pp. 1–16, 2015.
[19] W. Cai, J. Wang, P. Jiang, L. Cao, G. Mi, and Q. Zhou, “Application of sensing techniques and artificial intelligence-based methods to laser welding real-time monitoring: A critical review of recent literature,” J. Manuf. Syst., vol. 57, pp. 1–18, 2020.
[20] K. Epping and H. Zhang, “A sustainable decision-making framework for transitioning to robotic welding for small and medium manufacturers,” Sustainability, vol. 10, no. 10, p. 3651, 2018.
[21] R. Schneider, “Robotic automation can cut costs,” Manuf. Eng., vol. 135, no. 6, pp. 65–70, 2005.
[22] B. G. Chandankar and V. M. Chapte, “Productivity Improvement in Welding Robot,” IRB, vol. 601, p. 1, 2016.
[23] A. E. Öberg and E. Åstrand, “Improved productivity by reduced variation in gas metal arc welding (GMAW),” Int. J. Adv. Manuf. Technol., vol. 92, pp. 1027–1038, 2017.
[24] J. Qiao, P. Yu, Y. Wu, T. Chen, Y. Du, and J. Yang, “A compact Review of laser welding technologies for amorphous alloys,” Metals (Basel)., vol. 10, no. 12, p. 1690, 2020.
[25] T. Patterson, J. Hochanadel, S. Sutton, B. Panton, and J. Lippold, “A review of high energy density beam processes for welding and additive manufacturing applications,” Weld. World, vol. 65, no. 7, pp. 1235–1306, 2021.
[26] C. H. Kim, W. H. Choi, and K. Y. Park, “Application of laser remote welding to an aluminum automotive part,” in Materials Science Forum, Trans Tech Publ, 2010, pp. 966–969.
[27] T. E. Abioye, T. O. Olugbade, and T. I. Ogedengbe, “Welding of dissimilar metals using gas metal arc and laser welding techniques: a review,” J. Emerg. Trends Eng. Appl. Sci., vol. 8, no. 6, pp. 225–228, 2017.
[28] K.-M. Hong and Y. C. Shin, “Prospects of laser welding technology in the automotive industry: A review,” J. Mater. Process. Technol., vol. 245, pp. 46–69, 2017.
[29] G. R. Mirshekari, A. Saatchi, A. Kermanpur, and S. K. Sadrnezhaad, “Laser welding of NiTi shape memory alloy: Comparison of the similar and dissimilar joints to AISI 304 stainless steel,” Opt. Laser Technol., vol. 54, pp. 151–158, 2013.
[30] K. F. Kleine, W. J. Fox, and K. G. Watkins, “Micro welding with pulsed single mode fiber lasers,” in International Congress on Applications of Lasers & Electro-Optics, Laser Institute of America, 2004, p. M501.
[31] F. Lambiase, H. A. Derazkola, and A. Simchi, “Friction stir welding and friction spot stir welding processes of polymers—state of the art,” Materials (Basel)., vol. 13, no. 10, p. 2291, 2020.
[32] F. C. Liu, Y. Hovanski, M. P. Miles, C. D. Sorensen, and T. W. Nelson, “A review of friction stir welding of steels: Tool, material flow, microstructure, and properties,” J. Mater. Sci. Technol., vol. 34, no. 1, pp. 39–57, 2018.
[33] X.-S. Feng, S.-B. Li, L.-N. Tang, and H.-M. Wang, “Refill friction stir spot welding of similar and dissimilar alloys: a review,” Acta Metall. Sin. (English Lett., vol. 33, pp. 30–42, 2020.
[34] R. Nopriantoko, “Mechanical properties analysison FSW butt joint of aluminum alloy that applied in marine industries,” J. Polimesin, vol. 20, no. 2, pp. 213–216, 2022.
[35] P. K. Arya, N. K. Jain, and M. Jayaprakash, “Optimization of Process Parameters for Friction Stir Welding of Aluminium Alloy AA5052-H32 by Using Taguchi Method,” in Advancement in Materials Processing Technology, Springer, 2022, pp. 71–81.
[36] A. O. Al-Roubaiy, S. M. Nabat, and A. D. L. Batako, “An Investigation into Friction Stir Welding of Aluminium Alloy 5083-H116 Similar Joints,” Mater. Today Proc., vol. 22, pp. 2140–2152, 2020.
[37] R. Nopriantoko, “Energy absorption and toughness analysis on FSW butt joint of AA 5052 and AA 5083,” J. Polimesin, vol. 21, no. 4, pp. 414–420, 2023.
[38] Z. Shen, Y. Ding, and A. P. Gerlich, “Advances in friction stir spot welding,” Crit. Rev. Solid State Mater. Sci., vol. 45, no. 6, pp. 457–534, 2020.
[39] G. Çam and G. İpekoğlu, “Recent developments in joining of aluminum alloys,” Int. J. Adv. Manuf. Technol., vol. 91, pp. 1851–1866, 2017.
[40] A. SJ and A. Natarajan, “Review on the advancements and relevance of emerging joining techniques for aluminium to polymers/carbon fibre-reinforced polymer lightweight hybrid structures,” Proc. Inst. Mech. Eng. Part L J. Mater. Des. Appl., vol. 236, no. 12, pp. 2394–2435, 2022.
[41] S. F. Raza, “Ultrasonic welding of thermoplastics.” University of Sheffield, 2015.
[42] S. K. Bhudolia, G. Gohel, K. F. Leong, and A. Islam, “Advances in ultrasonic welding of thermoplastic composites: a review,” Materials (Basel)., vol. 13, no. 6, p. 1284, 2020.
[43] K. Mehta, “Advanced joining and welding techniques: an overview,” Adv. Manuf. Technol. Mod. Mach. Adv. Joining, Sustain. Manuf., pp. 101–136, 2017.
[44] M. P. Matheny and K. F. Graff, “Ultrasonic welding of metals,” in Power ultrasonics, Elsevier, 2015, pp. 259–293.
[45] M. Alexy, D. van de Wall, G. Shannon, and M. L. Boyle, “Batteries need strong connections–are resistance, laser and micro TIG welding the best suited joining technologies,” Biul. Inst. Spaw., vol. 1, no. 2019, pp. 53–63, 2019.
[46] K. O. Cooke and A. M. Atieh, “Current trends in dissimilar diffusion bonding of titanium alloys to stainless steels, aluminium and magnesium,” J. Manuf. Mater. Process., vol. 4, no. 2, p. 39, 2020.
[47] P. Garg, A. Jamwal, D. Kumar, K. K. Sadasivuni, C. M. Hussain, and P. Gupta, “Advance research progresses in aluminium matrix composites: manufacturing & applications,” J. Mater. Res. Technol., vol. 8, no. 5, pp. 4924–4939, 2019.
[48] A. Czupryński, “Microstructure and abrasive wear resistance of metal matrix composite coatings deposited on steel grade AISI 4715 by powder plasma transferred arc welding part 1. Mechanical and structural properties of a cobalt-based alloy surface layer reinforced with p,” Materials (Basel)., vol. 14, no. 9, p. 2382, 2021.
[49] V. Igwemezie, M. Shamir, A. Mehmanparast, and S. Ganguly, “A review of LTT welding alloys for structural steels: Design, application and results,” J. Adv. Join. Process., vol. 5, p. 100110, 2022.
[50] A. I. Albannai, “Review the common defects in friction stir welding,” Int. J. Sci. Technol. Res, vol. 9, no. 11, pp. 318–329, 2020.
[51] B. Jiang, Q. Chen, and J. Yang, “Advances in joining technology of carbon fiber-reinforced thermoplastic composite materials and aluminum alloys,” Int. J. Adv. Manuf. Technol., vol. 110, no. 9–10, pp. 2631–2649, 2020.
[52] L. Zhu et al., “Recent research and development status of laser cladding: A review,” Opt. Laser Technol., vol. 138, p. 106915, 2021.
[53] M. R. Dorfman, “Thermal spray basics,” Adv. Mater. Process., vol. 160, no. 7, pp. 47–51, 2002.
[54] S. Zhang, X. Xu, T. Lin, and P. He, “Recent advances in nano-materials for packaging of electronic devices,” J. Mater. Sci. Mater. Electron., vol. 30, pp. 13855–13868, 2019.
[55] J. Abry, C. Mittelhaeuser, S. Wolf, and D. Turlier, “Enhanced fatigue structural stress analysis of a heavy vehicle seam welded steel chassis frame: FEA model preparation, weld model description, fatigue stress calculation and correlation with 10 year operating experience,” Procedia Eng., vol. 213, pp. 539–548, 2018.
[56] G. Wang, Y. Zhao, and Y. Hao, “Friction stir welding of high-strength aerospace aluminum alloy and application in rocket tank manufacturing,” J. Mater. Sci. Technol., vol. 34, no. 1, pp. 73–91, 2018.
[57] M. M. Z. Ahmed, M. M. El-Sayed Seleman, D. Fydrych, and G. Çam, “Friction Stir Welding of Aluminum in the Aerospace Industry: The Current Progress and State-of-the-Art Review,” Materials (Basel)., vol. 16, no. 8, p. 2971, 2023.
[58] I. A. Soomro, S. R. Pedapati, and M. Awang, “A review of advances in resistance spot welding of automotive sheet steels: emerging methods to improve joint mechanical performance,” Int. J. Adv. Manuf. Technol., vol. 118, no. 5–6, pp. 1335–1366, 2022.
[59] A. Nycz et al., “Challenges in making complex metal large-scale parts for additive manufacturing: A case study based on the additive manufacturing excavator,” in 2017 International Solid Freeform Fabrication Symposium, University of Texas at Austin, 2017.
[60] G. V. Ngo, “Automated orbital welding of carbon and low-alloy steels pipelines with small diameter,” in Materials Science Forum, Trans Tech Publ, 2020, pp. 766–771.
[61] M. Gupta, M. A. Khan, R. Butola, and R. M. Singari, “Advances in applications of Non-Destructive Testing (NDT): A review,” Adv. Mater. Process. Technol., vol. 8, no. 2, pp. 2286–2307, 2022.
[62] N. Gangil, A. N. Siddiquee, and S. Maheshwari, “Towards applications, processing and advancements in shape memory alloy and its composites,” J. Manuf. Process., vol. 59, pp. 205–222, 2020.
[63] M. Munsch, “Laser additive manufacturing of customized prosthetics and implants for biomedical applications,” in Laser additive manufacturing, Elsevier, 2017, pp. 399–420.
[64] X. Chen, Y. Mao, J. Zheng, C. Yang, K. Chen, and S. Zhang, “Clinical and radiological outcomes of Chinese customized three-dimensionally printed total temporomandibular joint prostheses: A prospective case series study,” J. Plast. Reconstr. Aesthetic Surg., vol. 74, no. 7, pp. 1582–1593, 2021.
[65] E. Karayel and Y. Bozkurt, “Additive manufacturing method and different welding applications,” J. Mater. Res. Technol., vol. 9, no. 5, pp. 11424–11438, 2020.
[66] R. Goel and P. Gupta, “Robotics and industry 4.0,” A Roadmap to Ind. 4.0 Smart Prod. Sharp Bus. Sustain. Dev., pp. 157–169, 2020.
[67] F. Mueller, C. Deuerlein, and M. Koch, “Intuitive welding robot programming via motion capture and augmented reality,” IFAC-PapersOnLine, vol. 52, no. 10, pp. 294–299, 2019.
[68] R. Mahadevan, A. Jagan, L. Pavithran, A. Shrivastava, and S. K. Selvaraj, “Intelligent welding by using machine learning techniques,” Mater. Today Proc., vol. 46, pp. 7402–7410, 2021.
[69] Y. Zhang, “Analysis on the development status of automobile lightweight welding technology,” in Journal of Physics: Conference Series, IOP Publishing, 2021, p. 12001.
[70] N. A. Astafeva, “Modeling of welding process and allied technologies,” in Key Engineering Materials, Trans Tech Publ, 2018, pp. 323–328.
[71] M. Restecka and R. Wolniak, “IT systems in aid of welding processes quality management in the automotive industry,” Arch. Metall. Mater., vol. 61, no. 4, pp. 1785–1792, 2016.
File Tambahan
Diterbitkan
Terbitan
Bagian
Lisensi
Hak Cipta (c) 2025 Journal PEP Bandung
Artikel ini berlisensi Creative Commons Attribution-NonCommercial 4.0 International License.
